Configure an ACE IPv6 Traffic Class

Configure ACE IPv6 traffic class.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation pane, expand Configuration > Security > Data Path.
  2. Select Advanced Filters (ACE/ACLs).
  3. Select the ACL tab.
  4. Select the appropriate ACL.
  5. Select ACE.
  6. Select the appropriate ACE.
  7. Select IPv6.
  8. Select the Traffic Class tab.
  9. Select Insert.
  10. In Oper, select the operation type.
  11. In TrafficCls, type the traffic class number.
  12. Select Insert.

Traffic Class Field Descriptions

Use the data in the following table to use the Traffic Class tab.

Name

Description

AclId

Specifies the ACL ID.

AceId

Specifies the ACE ID.

Oper

The eq parameter specifies an operator for an “equal to” field match condition.

TrafficCls

Specifies the traffic class attribute of the IPv6 header. Traffic class identifies different classes or priorities of IPv6 packets. The range is 0–255.